A1 Side Mounting option for Reolink E1 Pro

This model allows you to position a Reolink E1 Pro (or any Reolink camera with the same base diameter) on the side of your A1 Bambu Lab printer. It just slides into place on the side of the printer and the weight of the printer itself holds it in place.

The package contains two models: the base brackets and the camera holder.

• The base bracket has four 2.8mm diameter holes. You can choose to mount the camera in either pair (closer or father).
• The camera holder also has two 2.8mm diameter holes.

To mount the camera onto the model, use the camera mount provided with the Reolink E1 Pro, as shown below:

The screw I used to to hold the camera pins, the camera holder and the base bracket together are two wood screw with 3mm diameter and length of 12mm, with a tapered head, but you can use any screw that fits into the holes (any 3mm diameter screw would work fine).