IMPERIAL INFANTRY FIGHTING VEHICLE [PRESUPPORTED]

Hey, I hope you enjoy this release! Before we start you should know that I had to shorten some names due to the file path being too Long for Windows to handle. I would also recommend to use 7z or another appropriate program to unzip These files as Windows might have some Problems doing it.The files that are impacted by the shortening of the names:- Hunter Killer Missiles for some hatches/turrets The respective abbreviations are:- NA -> No Aquila- HKM -> Hunter Killer Missile As Always: LYS-prefix -> presupported Lychee fileSTL-prefix -> presupported STL fileno prefix -> raw model All turrets can now be magnetised to the hull with the help of a 6x2mm Magnet.The Lasgun Array is now magnetised with 3x2mm Magnets.All other magnet sizes are 5x1mm. You have the option to print the chimera with interior or without interior, the cupola, ramp and Hatch 2 from Hull 2 can me made rotatable with a paper Clip and some glue. All other Hatches must be glued either opened or closed. Due to the vanilla cupola Connection/swivel Point being a bit fragile, as of 04.06.2025 (DD/MM/YYYY) I have reinforced the geometry of these to be a it more sturdy.I have also included a experimental Version of the cupola Connection/swivel Points which should hopefully be even sturdier, you can find These versions in the Folder:"Turrets Experimental Cupola Connection". The Turrets can be fitted on a GW Chimera Hull or vice versa.Although some parts might fit the GW Chimera it is not tailored to be a conversion kit, please Keep that in mind.But some files included in this kit are indeed designed to be used for conversion purposes. These are named accordinglyThe affected files are:- Heavy Stubber & Hunter Killer Missiles found in the "Turret Hardpoints" Folder of Turret 2. Difference Between Track 1 and Track 2 are the skirts on the tracks, Track 2 has the skirts like the rogal dorn & baneblade.The skirts on Track 2 are now seperated to allow for easier painting of them. Please Keep in mind that the lychee files of the Right side of tracks 1 & 2 have invalid holes. If you want to Export the Lychee files as a 3D model please use the file with the "STL-" prefix instead. Lychee will also Show you a warning if you want to Export the models with invalid holes.If you just want to save the Lychee file or slice it directly in Lychee you can ignore this and just use the Right side's tracks normally. No scaling needed, Scale is 1:1.Print everything once, unless told otherwise feel free to donate me a coffee or join my patreon if you want to :D https://ko-fi.com/alpineweiss3d https://www.patreon.com/c/AlpineWeiss3D for further questions you can reach out to me via Discord: weisssnix_97255instagram: alpineweiss3d As always please leave suggestions, feedback or ideas in the comments of the model or join my discord to stay updated: https://discord.gg/eA6zy9KGCZ Stay tuned! AlpineWeiss3D