Hello,

I hope you will enjoy this release!

As Always:

LYS-prefix -> presupported Lychee file
STL-prefix -> presupported STL file
no prefix -> raw model

The Trojan Support Vehicle works on the basis of my "Imperial Modular Fighting Vehicle". Therefore buying the mentioned kit is required in order for this kit to work.
Get it here:

Cults:
https://cults3d.com/en/3d-model/game/imperial-modular-fighting-vehicle-presupported

MMF:
https://www.myminifactory.com/object/3d-print-imperial-modular-fighting-vehicle-presupported-401774

The accessories (pallets) are available seperately:

Cults:
https://cults3d.com/en/3d-model/game/imperial-artillery-fire-support-stowage-presupported

MMF:
https://www.myminifactory.com/object/3d-print-imperial-artillery-fire-support-stowage-presupported-455096

This kit has everything to make the Trojan Support Vehicle module & a Trailer (optional), print everything once unless told otherwise. Some things are optional.

The main crane is magnetised with a 6x3mm magnet.
The hull weapons utilise a 5x1mm magnet.
The ramp can be magnetised with 2 5x1mm Magnets per side.

Either one 10x2mm magnet or 2 6x3mm Magnets for magnetising it for the modular Fighting Vehicle base Chassis.

The main cupola hatches, Cargo hatch & the ramp also have small holes where you can insert a paperclip, so they are able to move into an open/closed Position.
Similar for the Trailer, here only the Ramp & the trailers hitch are able to be mount a paperclip.

The Trojan's cargo capacity is:
1 Full Size Standard pallet or 2 half size pallet.

The Trailer's cargo capacity is:

1,5 standard pallets (1 full size & 1 half size pallet or other combinations)

You can outfit the trailer with optional troop seats. Please see render nr 17 for example pics.
Don’t forget to mount a stopper piece on each side of the interior when doing so.

The trailer can also mount either side railings or a container-like roof. Choose at your own liking.

Difference Between Track 1 and Track 2 are the skirts on the tracks, track 2 has the skirts like the Rogal Dorn & Baneblade.
The skirts on Track 2 are now separated to allow for easier painting of them.

Please Keep in mind that the lychee files of the Right side of tracks 1 & 2 have invalid holes. If you want to Export the Lychee files as a 3D model, please use the file with the "STL-" prefix instead. Lychee will also Show you a warning if you want to Export the models with invalid holes.
If you just want to save the Lychee file or slice it directly in Lychee you can ignore this and just use the Right side's tracks normally.

No scaling needed, Scale is 1:1.
Print everything once, unless told otherwise.

feel free to donate me a coffee or join my Patreon if you want to :D

https://ko-fi.com/alpineweiss3d

https://www.patreon.com/c/AlpineWeiss3D

for further questions you can reach out to me via

Discord: weisssnix_97255
Instagram: alpineweiss3d

As always please leave suggestions, feedback or ideas in the comments of the model or join my discord to stay updated:

https://discord.gg/eA6zy9KGCZ

Stay tuned!

AlpineWeiss3D