Imperial Tank Recovery Unit [PRESUPPORTED]

Hello, I hope you will enjoy this release! As Always: LYS-prefix -> presupported Lychee fileSTL-prefix -> presupported STL fileno prefix -> raw model This kit contains everything to make an Atlas Recovery Vehicle, print everything once unless told otherwise. The side crane is magnetised with a 6x3mm magnet.The hull weapons use a 5x1mm magnet. Difference Between Track 1 and Track 2 are the skirts on the tracks, track 2 has the skirts like the Rogal Dorn & Baneblade.The skirts on Track 2 are now separated to allow for easier painting of them. Please Keep in mind that the lychee files of the Right side of tracks 1 & 2 have invalid holes. If you want to Export the Lychee files as a 3D model, please use the file with the "STL-" prefix instead. Lychee will also Show you a warning if you want to Export the models with invalid holes.If you just want to save the Lychee file or slice it directly in Lychee you can ignore this and just use the Right side's tracks normally. Gantry Crane This kit contains everything to make an Imperial Gantry Crane for Diorama purposes, print everything once unless told otherwise. To utilise this kit to the full potential you have to magnetise it. You can also just choose to glue everything. The lift unit main part is magnetised to the track unit with 5x1mm Magnets.The middle part of the Elevation mechanism is magnetised with 5x1mm MagnetsThe Arm 2 connectors are magnetised with 6x2mm Magnets. The Trailers hitch has a hole where you can insert a paperclip to be able to move a bit. I've put the most important Assembly instructions into the renders. Please Keep in mind that the tracks are not exactly symetrical. Put them onto the individual Units with the side that has no resistance when trying to assemble it.You may Need to sand the individual moving parts a Tiny bit if they are hard to move.   No scaling needed, Scale is 1:1.Print everything once, unless told otherwise feel free to donate me a coffee or join my Patreon if you want to :D https://ko-fi.com/alpineweiss3d https://www.patreon.com/c/AlpineWeiss3D for further questions you can reach out to me via Discord: weisssnix_97255Instagram: alpineweiss3d As always please leave suggestions, feedback or ideas in the comments of the model or join my discord to stay updated: https://discord.gg/eA6zy9KGCZ Stay tuned! AlpineWeiss3D