Pasta Party Multi-Pack

PRIVATE USE ONLY⚠️ Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options! DESIGN DESCRIPTION 🍝🥣🧀 Hi friends! Today’s pack is a fun, food-themed collection inspired by one of my favorites—pasta! 🍝 It all started with a craving for mac and cheese (with optional hot dogs for my fellow cool kids 😉), and I thought it would make the cutest clicker. Once I got started, I had to add ravioli and spaghetti to the mix—and of course, each bowl needed an adorable little face! This pack was so much fun to design, and I hope you love this pasta party as much as I do! 🍝🥣🧀 Pack Contains This pack contains 6 unique base designs and 6 cap designs. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration. CLICKER INFORMATIONℹ️ Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process). LICENSING⚠️ This is a PRIVATE USE ONLY license. Commercial License options available 👉HERE Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED. PHOTO COLORS🎨 Bambu Basic Turquoise PLA Bambu Basic Maroon Red PLA Bambu Basic Green PLA Bambu Sunflower Yellow PLA Bambu Basic Brown PLA Polymaker Polylite Cream PLA Bambu Basic Black PLA Bambu Basic White PLA Bambu Basic Pink PLA 3D PRINT SETTINGS⚙️ Layer Height: 0.2mm (recommended) External Perimeter (Outer Wall): 0.33mm (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: For the raised caps, print them face up so you have a nice textured surface. ⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean! Stay Pawsitive! 🐾 For model help or other questions, please contact us at [email protected]