11th Edition Foldable Ruins - NuGoth Imperial

These files are designed to fit A1 Mini sized printers, and they come prepared for multicolour printing. ⚠️ Non-manifold / floating regions warning The non-manifold or floating regions warning can be safely ignored. Still, always check the toolpath preview before printing, just to make sure your slicer is not doing anything unusual. This warning appears because the files are built from multiple closed meshes, and some of those meshes share coincident triangular faces so the multicolour geometry lines up correctly. That can trigger a non-manifold warning, but slicers handle it cleanly and it should not affect print quality. The floating regions are also intentional. Most of them are bridges required for the preassembled hinge mechanism, so they do not need supports. ⚠️ About the colour-separated files The files are kept colour-separated on purpose. Most slicers allow you to combine or merge the parts into a single object for printing. If the files were exported only as one single STL, you would lose some slicer control, especially for things like Fuzzy Skin, which makes the stone texture look really nice on monocolour prints too. For Cura: import the parts, select them, right click, then use Merge. If your slicer handles this differently and you get stuck, just let me know and I’ll help you figure it out. +++++++++++++++++++++++ Tinker Junkie is back with more Foldable terrain with the 11th Edition compatible NuGoth Imperial versions of the Tournament layout buildings with a twist: these are foldable pieces that lay flat once closed. They don't require assembly (they're print in place), and if you are lucky enough to have a multicolor printer, you can also print them in two colors. So it's really print and play, no hassle. This pack includes 4 foldable terrain buildings designed to match standard competitive 11th Edition layouts. If you are a 40k player looking for a good-looking and practical terrain set for competitive games, this is probably what you were looking for. Compact, table-ready, easy to store, and much nicer on the table than plain flat templates. To cover a full 44 × 60 in tournament table, you will need to print 2 copies of each foldable terrain Piece. ⚠️ Do not leave any 3D printed part in the sun or in very hot environments, like a car in summer. PLA’s glass transition temperature is around 60 ºC, so be careful with your prints if you do not want warping. +++++++++++++++++++++++ Happy 40k games, and good luck on the dice!   These files are provided for personal use only and may not be distributed or sold. This license allows for the printing and modification of terrain pieces for personal use in games and displays. Please do not share this files, respect the creators effort by keeping these to yourself. Tinker Junkie is an independent creator and is not affiliated with or endorsed by Games Workshop Ltd. ‘Warhammer 40,000’ is mentioned solely to indicate compatibility.