sure.t Mag - Improved Cutouts

I love printed mags. The sure.t mag by t4obrien is my favorite, it works great in most things. Unfortunately when I built a Crush I realized that the mag release cutout on basically every 3d printed mag differs pretty significantly from the standard talon mag, and they did not work at all on the Crush. 

I have edited the sure.t mag to have deeper and wider cutouts that more closely mimic standard talon magazines. This allows them to work in the Crush and any other blaster that needs the cutout to reach the corner of the magazine body. I have tested them and they work in every blaster that I own that accepts talon mags. I have also included a low profile end cap that should friction fit to the bottom of the magazine (based on Nick_Furry's end cap), and a follower based on t4obrien's. 

Print settings are the same as the normal sure.t mag. I use supports on the new cutouts, but I don't know if they are really required. Everything should already be in print orientation. I have included size options from 6-16 rounds, I can provide longer or shorter mags if anyone finds these useful.

Updates

11/24/2024 - Added 17 round magazine

12/21/2024 - Added a TPU bumper based on Irons' bumper to cushion the mags a bit from falls. I print these with 2 walls 10 gyroid infill so the padding is pretty soft and squishy. On my printer they tightly grip the bottom of the mag, but your mileage may vary, +-1% scale will probably get them where they need to be regardless of your printer.