Deadpool Wolverine Fused Figure

Description

Inspired by the new Deadpool Wolverine movie, we made an awesome little figurine where we fused the two of them together!
If you sign up on our Patreon, you can also access a painted 3mf version of Deadpool Wolverine for multicolor printers up to 4-5 colors if you have a multicolor ams system printer! ▶https://patreon.com/SEREV3d
 

And we have a few more different variations of it on Patreon (you can see the example images in the gallery above)

What filament to use for Deadpool Wolverine Fused Figure? We recommend: 

▶Bambu PLA Basic White

OR
▶Bambu PLA Basic Light Gray

Recommended painting steps:

1.Spray with plastic primer. 
2.Base Colors: Paint large areas -red and black for Deadpool, yellow and dark blue for Wolverine). 

3.Details: Use small brushes for eyes, belt logo, and the black stitches. 

4.Washes: Apply thin dark washes for shadows. 

5.Dry Brush: Lightly brush lighter colors on raised details. 

6.Seal: Apply a clear sealant to protect the paint.

PRINT info and advice:
If you use the print profile we provided the manual tree supports are already set up and added on the file as well as all the recommended settings, with Bambu Slicer it's all fully ready to print!
The easiest way to remove supports: we recommend to use a thin pliers, blade/knife to cut out/remove the supports.

*Suitable for FDM and resin printing too (in resin the textured surface details will definitely show better.)
(You can use automatic tree supports for this print, make sure to have the Top Z distance in between 0.28-0.3, and the Bottom Z distance around 0.2 to be able to remove supports more easily. 

-Be careful at the parts of the claws, since it's a thin part of the print it's better use a blade/knife to carefully remove the supports from those parts.)

We are looking forward to see your makes, feel free to share them in the comments!:)

Join our SEREV 3d Patreon All-access SEREV Member tier for Commercial license and access to 50+ awesome 3d printable designs, for ONLY $13

We are looking forward to see your makes, feel free to share them in the comments!:)

Print Settings

Printer Brand:

Bambulabs

Printer: 

Bambu P1S

**Rafts:**

No

Supports: 

Yes

**Resolution:**

0.16mm

Infill: 

10%

Category: Toys & Games