Zombicide Green Horde Hedgerows (Full 1 Piece set - ONLY for buildplates bigger than 250mm)

This is a complete set of 3D hedgerows for Zombicide Green Horde.

ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game.

PLEASE NOTE: This set is ONLY for build plates that can print 250mm or larger models. If you have a smaller build plate, then I have a set that have been designed for smaller build plates. These models have been cut in 2 where needed to make it easier to print them. The only draw back is, that they will need gluing together (unless you just want to fit them together loosly for easier storage) using the tab and slot provided. Just put glue on the tab (and end if needed), put both pieces to be joined on a table, then push them together and leave to dry.

Some trees, bushes and rocks have been modelled that touch the hedges, as on the gameboard tiles.

I have included a Hint & Tips sheet to show you where each hedgerow sits on the tile. There are a few similar types and I have included this sheet for clarity. I did originally start to put names underneath but this caused too much hassle and time while designing. You can always mark the bottom with a marker pen after printing so you know which hedgerow is which.

The majority of files are hollow(ish) in one way or another to cut down on filament use. I have suggested infill at 10% but you can adjust this to how you feel best. Because of this, the files may look strange when being printed, but the finished product will look as the pictures above.

Please use the gameboard and the hedge token picture in the token set I created (https://www.printables.com/model/1001541-zombicide-black-plague-green-horde-tokens-doors-he) for ideas on how to paint these.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I printed these on my Creality CR-6 SE printer with Cura slicer 5.8.1 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 80mm/s (First layer @ 50mm/s)

Nozzle Temperature: 210 Degrees

Bed Temperature: 65 Degrees

Infill: 10%

Supports: No

Skirt: Yes / Optional

Brim: No / Optional

Raft: No / Optional

Enjoy.

                           https://www.buymeacoffee.com/tigertone