Nerf Silly Shell Carriers/Holders - Picatinny Mounted

Video overview here: 

Usage demo here (0:23): 

----------------------------------------------------------------------------------------

These are shell carriers/holders for Silly Shells! 

They all hold Silly Shells horizontally across the picatinny rail you attach them to. 

Shell carriers for 1 shell up to 9 shells are available. I recommend mixing and matching multiple of each length to best fit whatever blaster you use, and to fit on your print bed. 

Keep in mind that you can print really long parts at a 45 degree rotated angle, corner to corner, to fit within smaller build plates on your printer of choice. 

----------------------------------------------------------------------------------------

Hardware:

Each holder uses an amount of M3x30mm screws equal to the amount of shells being held.

For example, the 3 shell holder uses 3x m3x30mm screws.

Additionally, depending on which SideB file you print, you can either just put the screws directly into plastic, or you can use M3 heat set inserts, or M3 hex nuts.

There's several versions of these holders: 

• M3 heat set inserts
• M3 hex nuts
• M3 screws straight into plastic

(I recommend using the M3 heat set version, but if you can't get M3 heat set inserts for whatever reason, you can still make this holder.)

----------------------------------------------------------------------------------------

Note: If you are using these on Battle Axe, I recommend you use two of the 3 shell holders, instead of one longer shell holder. This is because the spring swap on Battle Axe involves the picatinny rail splitting in half, and you don't want to be bridging those two halves with a picatinny attachment, which will keep them from properly separating.

----------------------------------------------------------------------------------------

Misc.

----------------------------------------------------------------------------------------

If you print any of my designs, I'd love to see yours! Please consider leaving a Make on the Printables page, and leaving a review!

China: 你好！ 我擁有這個設計。 想生產請聯繫我. 你好！ 我拥有这个设计。 如果你想生产，请联系我.

Disclaimer: This is not a toy. This blaster is meant for hobbyists, not children. Blaster must be operated correctly to avoid injury. I am not responsible for any injuries from this blaster. Please use a bright/blaze orange muzzle and barrel cap on blasters.

Changelog:

• 1-15-2025: Release
  • Updated on release day to add more capacity shell holders, from 1 to 9 shells, instead of just a 3x shell holder. Enjoy!

----------------------------------------------------------------------------------------

Donations & Merch

----------------------------------------------------------------------------------------

If you like what I do, please consider supporting me! 

I don't charge for my files, so any donations or merch purchases would be greatly appreciated!

• Patreon (Monthly donations)
• Buy Me A Coffee (One-time donations)
• RedBubble My merch shop, full of fun Nerf-y stickers and shirts!