Berserk 13 - A Dummy 13 armor mod bundle

"I don't care about pain anymore, more important than pain is this impulse that's rising within me. I feel as though there's something violent boiling up from within..."

"Let go... Let go of everything... LET GO!!!"

This is a remixed armor mod from Soozafone's Dummy 13 model found here: https://www.printables.com/model/981111-dummy-13-version-10

This model is scaled up 150% of the original model. If you wish to print to the original model's scale, scale these models to 66%.

All files are orientated in their optimized direction to ensure part strength and detail. 

Use of Raft is optional depending on your bed adhesion, Tree supports are highly encouraged.

This is a work in progress so please feel free to comment your experience with it so that I can improve the models on issues I hadn't initially found in my own test printing. Have fun and go Berserk!

10-16-2024 Edit: If you are having a rough time figuring out assembly, all parts should follow the instructions given on the dummy13 page provided. the "3" shaped joint parts can be flipped if it makes it easier to put the limbs together.

10-21-2024 Edit: I have added a new file that is a rework of the 9.0-dragonslayer model. It'll allow you to print just 1 half of the sword at a time so you can make both sides cleaner without supports.

10-23-2024 Edit: For anyone having issues with sword scaling, the sword dimensions are: 218.5mm long, 30mm wide, and 8mm tall. For people using the Half sword file, change the height to 4mm tall.

10-29-2024 Edit: If you are having excessive adhesion issues and/or sections are not printing on the chestplate file, try the 2-chestplate-v3-HOTFIX stl. It will look exactly like the other chestplate model but is remodeled slightly to help slicers other than Cura print it.

12-17-2024 Edit: I have been overclocking my brain trying to figure out why the feet keep messing up for everyone, but I think I finally got it! there is an individual foot file called 6.1-footx1-HOTFIXv2. It should work for the different slicers :)

2-6-2025 Edit: Uploaded a hotfix for the 5-Upperlegs v2 file for people not able to get full prints. Please continue to comment if you have issues with prints, I make sure to do test prints of every update i make but I still see a trend of some people getting different results than me.

2-17-2025 Edit: Hotfix Upperlegs v2 file seemed to not fix the problem for some people so I am reuploading a v3 of that. Basically remodeled the whole thing from scratch so I dont see there being many more issues. Do feel free to comment if there are issues with it or any of the other files!

3-12-2025 Edit: Was asked to make an alternative version of the helmet part where the eyes are filled in for all you people out there that have dual color printers. This way you can make the iconic red eyes for the armor if you have the means, or if you just wanna print the whole thing in black again then just paint in the red. Either works!