Harvest Insert (Keymaster 2024 Retail Version)

An important note on crop tiles:
 

It appears that some versions may have thicker crop tiles than my copy (which I based this insert on). Before printing, please ensure that your copy will fit correctly. The depth of the crop tray is as follows:

• 12x Pumpkins: 22 mm

• 12x Blueberry bushes: 22 mm

• 12x Blueberries: 22 mm

• 12x Wheat: 22 mm

• 20x Strawberries (two rows of 10): 19.25 mm

@yourarm has made a remix of the Crop Tray with deeper recesses, which you can find here: Harvest Farmhouse Tile Tray with deeper holes. This version has the following depths for the crop tray:

• Pumpkins: 34 mm (10 mm deeper)

• Blueberry Bushes: 24 mm (2 mm deeper)

• Blueberries: 24 mm (2 mm deeper)

• Wheat: 22 mm (same depth as original)

• Strawberries 28.25 mm (9 mm deeper)
  
  - - - - - 

This is an insert for the retail edition of Harvest (2024, Keymaster Games). Note that it will not fit the Kickstarter promo pack or the deluxe edition (that already has an insert).

This insert has removeable trays which can be used during gameplay (coins, crops, building tiles, etc.), and allows it to be printed on most 3D printers.

When aligned correctly, the trays allow the player boards to fit in a recessed section in the middle. The board goes on top, and there is a recessed corner which you can press on to get it out of the box easily.

Print one of each file. The filler tray with the Harvest logo can be printed using a manual color change to add some contrast.

To save time, I printed at 0.30 mm with variable layer height and 5% gyroid infill.