Hydrodrive Jetpack for Transformers Legacy Animated Bumblebee

So here's a little addon for animated bumblebee - his hydrodive jetpack!

To get Bumblebee fitted in there, just need to flip the top piece forward and downwards, get Bumblebee snugly nestled in there and reposition the top piece back in place!

Like the original, Bumblebee's stinger missile will fit into the underside of the wings and in the back parts, a pair of 5mm ports allow for effect parts to be fitted in there!

Coming over to the jetpack mode for Bumblebee's bot mode, just flip the entire getup over his head. And on the rear, there's a little rectangular notch, where the tab on bee's back will notch in when the back flap has been folded up.

From the front, the handles of the twin side guns can then be held in Bumblebee's hands to make the whole thing more stable! 

=== Assembly ===

The included assembly diagram shows how all the pieces go together.

All the connecting pegs are provided as printable bits, but they can also be substituted using regular 3mm rods cut down to length. 

---

So yeah, this is one for all you Animated fans out there - a little more obscure addon kit for Bumblebee! Hope y'all enjoy this one and happy 3d printing as always! =)