October 18, 2024
Description
I recommend to print the model from the .3mf file. Choose the print bed with the emote you like in the .3mf project and print!
For the assembly you need a mechanical switch. I used Akko V3 Pro Cream Blue, but it should work with pretty much any switch. Fit the switch house to the casing and put the top part on the stem. You also need to glue the stem to the pumpkin
(It was necessary to make the model this way considering the print positioning) and that's it!
No supports needed!
Printed in approx. 40 minutes!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
decay3d
