Delilah - YEHW Samson 5x3 inline shotgun barrel

I wanted a simple little shotgun hand cannon that could be used with one hand and fire multiple shots, and so I quickly modeled the “Delilah” barrel.

• Straight = 0 degree angle
• Spread = 1 degree angle
• Extreme spread = 3 degree angle

Loosely based on the concept of the Radson XL's 6x3 barrel, the Delilah perfectly fits 5x3 half darts, with a tightened barrel end that keeps the darts in place nicely. 

This is not very powerful, this is a close range sidearm.

The barrel is modified from my Minimal reprints 8cm MXL Samson barrel, but it will work with regular Samson parts as well. You will need to print the shortened top rail, and file down some parts of the “Vundahbah”:

This section should be flat, not curved. You could also slice and reprint it. Filed/sliced versions are still compatible with the original Samson barrel.

You either need to print all the parts for the Samson minus the barrel, or follow the instructions for my version that uses the YEHW styling.

This is my first time designing (or even using) an inline feed- so it might have some issues or not be very reliable/performant. Suggestions or remixes to improve it are very welcome.