Shield for Transformers Legacy Chromia

Inspired by the IDW comics, here's a protective shield to help outfit the latest version of Chromia in Legacy!

The shield is held by Chromia via attaching to the 5mm port in her forearm. Chromia's hand will first need to be flipped around inwards, so that there will be clearance to do so. Once in place. this tower shield shall do well to provide Chromia with a whole load of defense!

Right in the middle of the shield at the top, there's also a 3mm peg so that you can add on effect parts to simulate really near misses in the heat of battle!

Used together with the earlier battle halberd (https://www.patreon.com/posts/92585666), this set should really help jazz things up for Chromia!

Coming over to alt mode, a little 5mm peg designed into the top of the shield will allow it to be tabbed into the 5mm port on the upper part of Chromia's back.

Attached on this way and with the shield running down the length of her back, it really changes her motorcycle silhouette and makes her look much more Cybertronian!

=== Assembly ===

To allow for easier painting and then assembly, the shield has been designed as a "top" and "front" portion which can be printed in an opaque and transparent material respectively, and then slotted together.

Alternatively, a "whole" version of the shield is also included if you would prefer to print it all at one shot.

---

So there we have it - a defensive little accessory to keep Chromia safe as she leaps into battle! Hope you'll enjoy adding this to her arsenal. Happy 3d printing! =)