Pincers of Doom from Transformers the Movie

From the '86 Movie, here is the pincer of doom hanging display option for your bots!

This set works by magnetically attaching the pylons to the underside of a metallic shelf. Next, hang the pincers off the "rope" pieces, and anchored to the pylons.

Here's how the pincer part has the rope threaded through it before getting held up between the pylons.

There's also a flat topped, magnetized variant as a simpler option. This allows the pincer to be on its own. Here's how it looks , one the left, as compared to the original one one the right.

Here's the two sizes for the pincers for the Deluxe and Core sized figures, alongside the pylons and printable "rope".

=== Using the Pincers ===

To get bots held in the pincers, their 'fingers' are first rotated away from each other.

Next, you should be able to diagonally slide the bot in. Finally, rotate the fingers to the horizontal, and this will help support the bot in its grip.

Using this flattop version of the pincer with the installed magnets, you can also still insert the rope piece and then it's stuck to your shelf, it still looks like the pincer is riding along the rope!

=== Assembly ===

The included diagram shows the various parts of this build and how they go together.

Again, the two sizes are prefixed accordingly with "Core" and "Deluxe" in the file set to differentiate between them.

Finally, the magnets required are rare earth magnets 5mm in diameter and 3mm thick.

---

Hope this evil set from Unicron's belly will be an interesting way to display your bots and free up some display space. Happy 3d printing! =)