Omni Arm and Keyboard for Transformers Moon Base-1 Crew Seat

Here's a further addon to the earlier Moon Base-1 Crew Seat (https://www.patreon.com/posts/91265449) in the form of a modified articulated Omni Arm and a Keyboard addon!

Here's how it all looks when put together with Prime taking the seat. From the rear, here's a look at the Omni Arm holding up the seat. The arm is articulated in 3 points.

The original Crew Seat back detail needs to be replaced with the Chair Attachment for the Omni Arm so that it can be bolted in place.

Ironhide can also use the seat too, though it may be a tad large for him. And, similar to how there were two sizes (Deluxe and Voyager) for the original Crew Seat, this addon kit also has two sizes for the keyboard and the Omni Arm attachment.

As an alternative, the keyboard can be used on its own with the crew seat, if you so choose.

=== Assembly ===

The attached diagram shows the parts for this build, and how they go together.

Do note that the articulated Omni Arm requires a bunch of M5 bolts of 12mm, 20mm and 40mm (with their corresponding nuts) to hold all the joints tightly together.

The entire assembly is also mounted on a CyberBase System compatible base tile, and so can be used in conjunction with other CyberBase pieces you may have.

---

Hope this is a fun addon kit for the Crew Seat which you may have already have. Happy 3d printing! =)