Fidlock\Midlock plates for the Protean

This is a mounting plate for Fidlock or Midlock studs designed for the Protean blaster. It comes in both Right and Left handed versions and it also features a spacer specifically designed to be used with the Solenoid pusher group of the Protean.

Printing Instructions

It's recommended to print the plate with 5 perimeters, 20% infill should be enough. The spacer it's fine with 3 perimeters.

Hardware and Assembly

The plate screws in the same holes as the slingpoint so it's not compatible with the Worker mech cover. For Hardware you'll need 2 M3x14mm bolts for the Semi-auto or 2 M3x18 bolts for the Solenoid version. To assemble it to the Solenoid cover first slide the bolts first in the plate and then in the spacer, then you can screw them into the receiver.