"Now for something completely different, but kind of the same!"
Introducing the Crush, FoamQB Edition! This Crush/Rush remix uses ALL NEW PRINTED COMPONENTS and is a COMPLETE REWORK from the originals, however it still retains the same hardware as a Crush, with a few exceptions. This kit prints with minimal supports, with only a few components requiring them.
FEATURES:
- Aesthetic Overhaul
- Talon Claw Ram Head (More Consistent FPS)
- Amoeba Control Group (New Mag Release, Trigger, & Sear Design)
- Amoeba Tank Lug (If You Really Wanted To…..)
REQUIRED ADDITIONAL HARDWARE:
- (2) M3 X 10 X 5MM OD Standoffs (Same As SBL1 Trigger & Sear)
- (5) M3 X 6MM Hex Socket Head Screws (For Top Rail)
- (2) M3 X 25MM Hex Socket Head Screws (For Trigger & Sear)
- (2) M3 X 30MM Hex Socket Head Screws (For Grip Lug)
IF USING AMOEBA TANK (LOL):
- (2) M3 X 25MM Thumbscrews
- (3) M3 X 8MM Hex Socket Head Screws
- (4) M3 X 15MM Hex Socket Head Screws
- (3) M3 X 30MM Hex Socket Head Screws
- (12) McMasterCarr M3 X 6.4MM Brass Heat Set Inserts
- Print Orientations Can Be Found On Amoeba Listing
FAQ:
- Can I use this with original Rush/Crush printed components? NO!
- Will you make a Straight Talon version? MAYBE WHEN I FEEL LIKE IT!
404
