Skeleton Bridge Pillar for wooden train tracks (Brio/Ikea)

I always felt like most models used unnecessary amounts of filament, so I decided to try and create my own models with less material. It's still reasonably strong and prints quite fast and without supports.

Recommended Settings:

You can totally get away with using 2 wall loops and save another 2g of filament, but obviously it's less strong.

I provided a 3mf project file, which you should use. The one in the Prusa directory is ready to print.

The generic one needs some adjustments. You should convert the objects with “anchor” in their name to modifiers and set those to 100% infill.

For some reason I cannot upload my print-ready 3mf/gcode from bambu, because Printables cannot read it correctly. I have added files that I created in Prusa Slice, but those are untested. Use the 3mf file to be on the safe side.

Feel free to give feedback if anything breaks or you have requests.