MacWheel MX1 Rear Fender

USE AT YOUR OWN RISK! THE INDIVIDUAL WHO PRINTS THIS ITEM IS THE MANUFACTURER OF THE FENDER AND THUS THE MANUFACTURER TAKES ALL RESPONSIBILITY FOR ITS USE OR MISUSE OR FAILURE.

I reverse engineered the broken fender from my son's MacWheel MX1 (approx. 2017 vintage). I looks like it would fit a few other brands like Hiboy S2 Pro Electric Scooter, iScooter MAX Electric Scooter however, the only scooter that I tested is the MacWheel MX1. Any other are just a guess but you scooter guys probably know other scooters which are interchangeable with the MX1.

I did extract the stainless steel washers from the old fender. Two of the three factory screws were long enough to use the washers (the back two). The front one was too short. I recommend replacing all of them because they are not a high grade of steel. Not sure which thread they are but they are metric. It would be easy to tap the holes to the next size larger imperial thread.

Use care to restrain the brake light electric cable so as to ensure that it does not interfere with the safe operation of the scooter. This fender has no features to restrain this cable. I forgot to put a 1/4" hole in the recess for the brake light to run the wires. All you have to do is drill a 1/4" hole between the two small holes in the brake light recess.

I hope you enjoy this part!