- There are a number of gridfinity generators out there, and some have the base that requires too much overhangs - slicers try to complain or add supports. Converted the model to be on a base that brings the bottom squares up to one another repairing that geometry.
- Removed magnets. Call me crazy, but the magnets and the screw holes are the least attractive function in gridfinity and I all play no role in their proliferation nor permit them in my library of gridfinity items.
- Added chamfers on the top. This is for the exterior top to save ones knuckles from accidentally raking your hand across it as well as the inner slots - allowing for the separators to find the groove a little easier and the cards to hit a 45 degree angle when coming in and keep sliding down instead of a hard stop at a flat surface.
Big props to the original creator, really like the concept, just need a couple tweaks.
Only bothered with the 5x2 model because that's the only variant that interested me and that I intended on printing… like 8 of them
BenBreaksThings
