January 7, 2025
Description
One Piece Jolly Roger Deck Box Lids. This is a Remix of a Remix inspired by another Remix of Whity's Rugged Box
The cover picture is a print of two designs, printed on an X1 Carbon and a third party PEY Plate. I printed these with thin walls enabled and a slower initial layer print speed to allow for better design details. No supports or brims were needed in this case.
Existing Jolly Roger Designs Inspired by:
I could potentially add more in the future, if there is a demand for certain designs. Some designs also have an inverted variant, as their stencil/silhouette may not be ideal compared to the negative. Most designs were grayscale'd PNGs quickly converted into SVG, so they may not be true to the canon jolly rogers.
I've also provided some modifications to the box itself. The original Magic Commander Box has a gasket tooth and I've opted to remove in favor for a PLA/PETG ornament color gasket trim (instead of the typical flexible filaments).
This page does not have the gasket or latches, as those files are in their original remix pages (Linked above).
NOTE: This version of the rugged box lids still fit M3 screw heads. In the pictured print, I used 6 M3x0.5x30mm Black Steel Alloy Hex Bolts. However, any M3 of a similar size should fit fine. You should also be able to use smaller length M3 bolts with varying thread lengths if needed. However, the 30mm length is the size to allow for a perfect flush mounting with 6 bolts.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Petaah
