Slotcar Crowngear

Which Slotcar-Set: Dickie Racing-Set 8 (Art.-Nr. 203) from the 1980s.

The motor pinion of this slotcar was from brass what has caused a major loss on the plastic gear's teeth. Because the crowngear is aligned to the outside, there was no chance to use a recent common gear.

• The axles diameter is 2.1 mm
• the gear has 18 teeth (about 1 mm in height and width)

I printed in PLA with 0.07 Ultradetail. Depending on durbility i'll try it in ASA and PC.