Annoying Gift Tube

Do you need to give someone a gift? Do you want to annoy them at least a little as well? This gift tube is just what you need.

It's not difficult to open, just a little annoying since you'll have to unscrew the entire inner tube out of the case, then unscrew an entire second tube this time with reversed threads!

There are four outer tube options. One of them is blank so you can customize it with your own text in the slicer.

If you want to be a little more annoying, check out the Extra Annoying Gift Tube.  If you want to be downright devious, check out the Crazy Annoying Gift Tube.

Printing tips:

The longest bridge is 25mm. On my printer, the one with supports is a little neater, but without supports looks pretty good. Make your own decision on supports based on your own experience with your own printer.

5% infill is plenty (I used grid) and the regular 2 walls will work great.

More Gift Tubes!

Looking for something a little smaller?  Try out the Small Annoying Gift Tube that's just big enough for a gift card.

If you want to make it even harder on your gift recipient, check out my puzzle tubes collection which has easy, hard, and downright impossible puzzle tubes!

Thanks for checking out my work!  If you like what you see, why not contribute to my filament fund?