Union Arena TCG Code Geass Rugged Deck Box

Deck Box Lids with a Code Bearer symbol I quickly made for the Union Arena TCG release of the Code Geass set. This is a Remix of a Remix inspired by another Remix of Whity's Rugged Box:

• https://www.printables.com/model/258431-rugged-box-parametric
• https://www.printables.com/model/514964-rugged-commander-deck-box
• https://www.printables.com/model/937856-assassins-creed-rugged-commander-deck-box-lid
• https://www.printables.com/model/644292-gasket-inlay-for-rugged-commander-deck-box

The cover picture was printed on an X1 Carbon with a third party PEY Plate. The provided profile for the X1C has thin walls enabled and a slower initial layer print speed to allow for better design details on these types of plates. No supports or brims were needed in my case.

NOTE: This version of the rugged box fits M3 screw heads. In the pictured print, I used 6 M3x0.5x30mm Black Steel Alloy Hex Bolts. However, any M3 of a similar size should fit fine. You should also be able to use smaller length M3 bolts with varying thread lengths if needed. However, the 30mm length is the size to allow for a perfect flush mounting with 6 bolts.