DJI Action 4 Airsoft Case

I wanted to record my airsoft games without worrying about breaking my camera.

You'll need :

1. Polycarbonate sheet to protect the front of the camera
2. Headed thread inserts + bolts to secure the sheet to the front of the case
3. Some thin foam to put at the back of the camera to avoid rattling as the fit could be loose or snug.

Hope this works and give me a follow or boost if it works out as well as it did for me!

** I tested this with a green gas shotgun with approx 300fps and it held up fine / point blank with AEG at approx 280fps as well.
With that said, I'm not responsible for what happens to your camera if you decide to use this case.
Side note, I only have two threads and bolts as I had messed up the holes on the sheet and had nothing to do with the case itself.

**
 

Printed in PETG with 11 wall loops

10 bottom/top shell layers

90% infill.