January 8, 2025
Description
Prepared the 3mf file of the Body for multi-color printers!
I made two types of toys:
The project contains many individual small parts, bed adhesion is super important! I recommend using glue or brim Mouse ears.
Print Settings:
| Filament | PLA, PETG others not tested |
| Layer Height | 0.2 mm or less |
| Wall loops | at least 3 |
| Infill | 15%, grid |
| Top\Bottom shell | 4 |
| Supports | None |
| Brim | As needed (depends on bed adhesion), recomended - Mouse ear |
For the part Face:
| Layer Height | 0.16 mm or less |
| Wall loops | 4 |
| Infill | 20%, rectilinear |
Simple assembly animated guide:
License:
Creative Commons — Attribution — Share Alike
Spacehead
