Trickerion Big Box Insert / Organizer

If you want, you can help me with designing inserts by donating here:
https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8

or joining my club here:
https://www.printables.com/@Sortirus_659392#join.@Sortirus_659392.1094

Hello,

for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused on reducing setup and space on table, filament consumption is not my highest priority, but of course I'm trying to save some material where I can.

Update 07.02.2026:

• updated description and photos, old version still supports new expansion - Arcane Arts.
   

Important Notes:

• My prints take a lot of time to print. Why? First of all, to save filament, electricity price is much lower than filament price (at least in my country). Second of all - total weight, if it's to high it can damage the box and our spines :D + weight also influence vertical storage, box can open by itself,

• Clearence for holder covers is very small - 0.2mm horizontal, make sure that you have calibrated printer. In worst case - you could add like 0.2-0.4mm to cover width in the slicer,

• Why I made this insert? Trickerion insert is not bad, but it's hard to fit cards with sleeves. Additionally I hate multi layered inserts, I don't like that 90% of the box needs to be taken out,

• For this insert you will need few boxes from the original inserts (player boxes, ). For me they're pretty great, there is also a lot of space in the box left, so I decided to leave them to reduce filament usage.

Supports:

• vertical storage,

• Arcane Arts expansion,

• sleeves 70 micron,

• metal coins - at least 2 packs.

This insert features:

• Cards_Special_Assignment_Holder - for special assignment cards,

• Cards_Tricks_Holder - for trick cards,

• Coins_Shards_Holder_x2 - 2 holders for coins and shards,

• Tokens_Prophecy_Holder - for prophecy tokens, this is optional if you have some kind of bag for them,

• Setup_Holder - for components needed mostly during setup.

Requirements:

• about 430g (or 470g if you need tokens_prophecy_holder) (depends on your settings, I printed with 15% gyroid infill, 2 walls, 5 top and 3 bottom layers), 

• at least 216mm x 195mm print bed (rotate cards tricks holder 45deg).

Instructions:

Supports - no supports required.

• every file ended with xX (for example x16) - print X times (in given example - 16 times).
   

What future holds :

• I don't plan to change anything for now.

Enjoy!