Dieson Crusoe Organizer Insert

Board game insert for Dieson Crusoe! This 3-piece insert supports sleeved cards (up to 60 micron thickness), includes a dice tray with quest holder, and a removable token tray. Take out the dice tray and token tray, setup the game normally, slot your chosen quest in the dice tray, and get playing!

Features:

• Fits sleeved cards up to 60 micron thickness
  • This may fit 100 micron thickness sleeves if you place some cards on top of the dice in the dice tray for storage
• Elevated card wells to grab cards easier when removing them
• Dice tray with a slot to place your current quest
• Removable ramped token tray with separated bins for "always used" tokens and "sometimes used" cubes
• Recessed space for both cloth boards
• No lid bulge!

Instructions:

1. Print 1 of the Card Tray, Token Tray, and Dice Tray
2. Place all components in the box, with the Token Tray in the middle
3. Put the dice in the Dice Tray
4. Put the meeples and disks in the small bin of the Token Tray
5. Put all cubes in the large bin of the Token Tray
6. Put cards in the Card Tray
   1. If using <=60 micron thickness sleeves, then all cards can be placed in the Card Tray
   2. If using >60 micron thickness sleeves, some cards (i.e. all character cards) must be placed above the dice in the Dice Tray
7. Fold the cloth boards twice and place on top of the Token and Dice Trays
   1. You might want to "tuck in" the cloth boards near the edges so it doesn't get crimped by the VHS box clip
8. Place the rulebook on top of all components

My print settings (not necessary optimized):

• Bambu Lab A1
• PLA
• 0.1mm layers w/ 0.2mm stainless steel nozzle
• 3 wall loops
• 10% infill rectilinear