Easy Bolt Action + T-Pull Mod X-Shot Fury-X (simply slide over the picatinny rail)

UPDATE: additional versions with EXTENDED bolts
------------------------------------------------------------

Easy Bolt Action Mod ---> X-Shot Fury-X

To make the FuryX, bolt action or T-pull primeable - just slide it over the rear picatinny rail and fix it with the 3D printed pin.

Because this attachment covers the sights of the blaster I have put some new sights on the top of it (with holes for some small pieces of colored 1,75mm filament for better visibility).

For the left-handed people I also added a mirrored version of the bolts.

Other Fury-X stuff can be downloaded here.

• Update 19.1.2025:
  I added a Version with T-pull:
  
  → FuryX_T-Pull
  ___________________________________________________
   

• Update 23.1.2025:
  I added some bolt-action versions with bolts farer ahead placed in the middle of the blaster:
  
  → FuryX_Bolt_FRONT_(both_sides)
  → FuryX_Bolt_FRONT_(left_side)
  → FuryX_Bolt_FRONT_(right_side)
  ___________________________________________________

• Update 15.3.2026:
  I added some bolt-action versions with EXTENDED bolts:
  
  → FuryX_Bolt_FRONT_(both_sides)_EXTENDED
  → FuryX_Bolt_FRONT_(left_side)_EXTENDED
  → FuryX_Bolt_FRONT_(right_side)_EXTENDED
  
  → FuryX_Bolt_REAR_(left_side)_EXTENDED
  → FuryX_Bolt_REAR_(right_side)_EXTENDED
  
  I've also added an OPTIONAL Ball_Knob suitable for the versions, called FuryX_Bolt_FRONT.

  This can be attached to the bolt and secured with superglue.

  Please try it out to see if you like it before gluing it on.

  I personally find it quite comfortable to grip.

----------------------------------------------------------------------------------------------------------------------------

The files are already pre-oriented:

My print settings for PLA:
0,2mm layer height
7 walls
30% gyroid infill
7 top and bottom shell layers
NO supports needed (the optional Ball_Knob needs supports!)
use a brim if you have poor print bed adhesion!

If the pin is too loose or too wide due to printer tolerances, scale it a tiny bit up or down in your slicer (but DO NOT scale the length).

Thanks to Chance for the file I could use for this remix.