Helix Dice Tower Trays and Extras

I made several trays for the Helix Dice Tower as well as a base connector that can be added to any tray.

The Helix Dice Tower is a very compact design and thus is a very light tower. It's recommended to fill it with silicone, resin, sand or similar things to give it weight. But it also has a connector key at the bottom that fits with the trays. This makes it possible to print the tower at regular settings as the tray provides proper stability. 

Update:

• Added a fuzzy 3mf of the small tray.
• Here is a long tray.

Update:

• Added a funnel piece to glue to the cover, making it easier to throw dice in. Just use some drops of super glue and its done.
• Two new trays are made with a hex cutout for a ¼inch hex nut (standard camera thread). This allows to screw the tray to a camera flex arm or any other holding device. Makes it perfect to connect the tower to anything like wheelchairs, table or chair legs or simply having it on a tripod as a separate unit. So you can bring it closer to you or clear some space on the table.

Disclaimer: The dice in the pictures are my own creation, if you're interested in that, check out my Instagram profile and contact me there. Same for print on demand. I don't have a shop and do commissions and print on demand as my time allows.