Saturn V F-1 Engines (Rocketdyne F1)

Parts are separated for colour change of your choice. 

0.2 is fine to do entire print but if you have more patience I would recommend for the smaller parts printing with the higher resolution to get even a cleaner print.

Infill on all parts +- 15%.

Use brim to secure small pieces.
 

Useful Print Guides

• 0A_f1_engine_assembled

  • The main reason for including this part is for assembly reference but If you really want to I'm sure you can print this in one shot, with many supports and clever support blockers, as expected I'm sure because of the supports it might leave some scaring. (I'll give it a try at some point)

• 1_S_engine_plate_plain

  • Supports - None

    • Version 1, if you prefer this plain one print only this one.

• 1_S_engine_plate_higher_details

  • Supports - None

    • Version 2, this has more details but might be more time consuming.

• 2_S_engine_pins

  • Supports - None

• 3_S_engine_interface

  • Supports - None

• 4_S_main_block_oxizider_pumps

  • Supports - Yes (trees work best)

• 5_S_main_block_oxizider_pumps_nut_top

  • Supports - None

  • The two nuts are different in sizes, they should go in nicely if they don't you probably have them upside down, once they in as far it goes you will need to gently hammer them in more to push them to a point they should be.

    • The Top Nut should have at least 1 millimetre clearance from the top.

• 6_S_main_block_oxizider_pumps_nut_bottom

  • Supports - None

  • The two nuts are different in sizes, they should go in nicely if they don't you probably have them upside down, once they in as far it goes you will need to gently hammer them in more to push them to a point of where they they should be.

    • The Bottom Nut should be flush against the Oxidizer Pump's Cap

• 7_S_outrigger_arms_front_left

  • Supports - None

• 8_S_outrigger_arms__front_right

  • Supports - None

• 9_S_outrigger_arms_back_left

  • Supports - Yes (trees work best)

• 10_S_outrigger_arms_back_right

  • Supports - Yes (trees work best)

• 11_S_thrust_nozzle_turbine_exhaust_manifold

  • Supports - None

• 12_S_engine_injector_plate

  • Supports - None

• 13_S_stage_1_level_1_black

  • Supports - None

• 14_S_stage_1_level_1_white

  • Supports - None

The parts are kept in the original scale of 60% for the Saturn V Rocket build, nice and easy!

Enjoy!
 

Update One

1. The Pins added to secure the plate and F1- Engines alters the first layer of Stage 1, therefore I have included the modified first layers. 

   • 13_S_stage_1_level_1_black

   • 14_S_stage_1_level_1_white

You can now print the rest of Farscape1111 model as originally intended after using these modified additions.

Update Two

1. No more parts will be published on this version of the build. 

I'm now working on publishing a new/modified model created by Farscape1111 that will include the entire rocket with much easier/simpler print files and instructions.

Will keep you posted.

Cheers!