RedCowl Collet Dev Kit

Here is a Dev Kit for the collet I have used on SO many blaster frontends. I have made the license such that it allows for remixes and whatnot. 

I would LOVE to see this on blasters going forward, I just don't want people selling JUST the collet. I would also LOVE to get a heads up if you're going to be selling blasters with the collet in it! I can put a link here to the blaster. So while the license is “Noncommercial” that is to avoid some folks from running with it (Frontlinefoam), I will not have a problem with folks using it. 

As for how the dev kit works, its the two basic shapes for the collet. The female is meant to get booleaned to your front of the blaster. It doesn't need to be as long as it is, but I like it that long. Your mileage may vary, and feel free to play around with the length of the ramp face. The male is the most basic I could break it into. Don't add any geometry to the inside of the collet, nor add any geometry past the flat face closest to the collet fingers, as that may cause the collet not to be able to thread in enough OR come close enough to the blaster. 

Have fun, make cool stuff.