Adjustable weight system for LDY Orion V1.5

Purpouse of these spacers is not only to customize the looks of the balisong, but also customize the handle weight and thus the feel of the balisong. Best thing is that you dont need any extra hardware for this mod, since it uses the spare pin included with the knife as the extra weight. I am not sure if these work for the trainer blade.

There are 3 weight combinations:

same weight as stock: spacer_V5_heavy + 1 pin

heavier than stock: spacer_V5_heavy + 2 pins

lighter than stock: spacer_V5_light + 1 pin

Assembly:

1. Close the knife and point it with the blade towards you
2. Unscrew the 2 screws on the right handle
3. Remove the scale
4. Remove the stock spacer
5. Install the custom spacer with 1 or 2 pins
6. Install the scale
7. Screw in both screws

Print settings !IMPORTANT!:

0,12mm layer height
100% infill
Durable material