Spire's End Organizer Insert

Board game insert for Spire's End! This 4-piece insert supports sleeved or unsleeved cards, and includes slots for the action card deck and discard. Lids ensure that none of your pieces get mixed up regardless of sleeve thickness (or even no sleeves).

Features:

• Fits sleeved cards or no sleeved cards
• Lids for both trays, so components do not get mixed
• Slots for the action card deck and action card discard
• Ramped token tray with separated bins for all tokens
• Cutouts to make it easier to remove the lids, or pull the trays out of the box
• No lid bulge!

Instructions:

1. Print 1 of the Card Tray, Card Lid, Token Tray, and Token Lid
2. Place all action cards in the square bin of the Card Tray
3. Place all dice in the large bin of the Card Tray with the dice symbol
4. Place all red and black tokens in the center two large bins of the Card Tray
5. Place all yellow and clear tokens in the two small bins of the Card Tray
6. Put lids on both trays
   1. The Token Tray lid has a cutout that should match the dice bin cutout
7. Put all cards in the game box
8. Put both trays with lids in the game box

My print settings (not necessary optimized):

• Bambu Lab A1
• PLA
• 0.1mm layers w/ 0.2mm stainless steel nozzle
• 3 wall loops
• 10% infill rectilinear

Updates since photos were published:

1. Added a notch on the top of the Token Tray so the trays are easier to remove from the box.
2. Changed the main cube bins on the Token Tray to be square instead of rectangular, so it's easier to remove cubes while playing