February 8, 2025
Description
Base for this Gokou Ruri figure.
The original base had a laced pattern on it so I added a similar pattern made by
awie08 over on vecteezy.com. There are two versions one where the pattern is raised and another where it's sunk into the base. There's also a plain one.
This requires 2.5mm and 3mm metal rods. I purchased them on amazon and cut them using a dremel.
The rods need to be cut to the following sizes.
Right Foot:
Heel - 3mm - 1 x 13.5mm
Toes - 2.5mm - 1 x 10.5mm
Left Foot
2.5mm - 1 x 10mm
License:
Creative Commons — Attribution — Noncommercial
CallMeSora
