Star Wars D-O Droid Kit Card

This is my model for the “mini robots” contest; I hope you like it.

Printing:

Layer height: 0.15

Supports: No

Material: PLA, PETG, ABS…

I recommend printing the first two layers more slowly.

Assembly:

The assembly is relatively straightforward.  

1. Remove all the parts from the bracket.
2. Put something heavy like a nut in the room of the tire.
3. Connect both sides of the tire via the cube.
4. Add the piston to the tire.
5. And finally combine the two parts of the head and connect the head to the piston.

I used some superglue to make the model permanent.