Spinning Trading Card Display

This is a spinning Card Display used to display two Trading Cards, either in a card sleeve or out. It’s done by sandwiching the cards into the card display, putting the poke ball on top, putting that between the frames, putting the frames in the base, and putting the clips on top of the frame. I highly recommend watching the video below for instructions. 

There are two versions of the model:

One that can display two cards in a sleeve, and one that can display them out of a sleeve. For the two versions, all the bodies are the same, with the exception of the card holders. If you are using a clear sleeve, print only the two that begin with “sleeved,” and if you aren’t, only print the two that are labelled “sleeveless.”

Some other notes:

~Print the clips standing upright, so the layer lines are perpendicular with the lines of stress. Shouldn’t be a big deal, but it helps.

~The Poke Ball is split up into sections for AMS users to print it in different colors, but a similar effect can be achieved by adding your own pauses and swapping in filaments.

~The card holders are separated based on color, but if you want them to be the same color, you can put them on the same plate.

~There are two plates on the 3mf that are printed by object for AMS users to save filament.

Showcase Vid:

Build vid: