Inset tile with light for chinese clone of Connetix - Romboss. Block size is 65mm. (Aliexpress LINK)
You will also need:
Instructions
- Print tile back and front in your desired color. If you don't have 8mm LED, I have provided also standard 5mm led front tile.
- Print the diffuser with transparent filament.
- Using soldering iron attach the LED to the wires of the battery holder.
- Take the battery holder and use the hot glue to attach it to the back side of the tile (as in the pictures).
- Put the LED through the hole on the front tile.
- Attach diffuser and using hot glue fasten it in place
- Using the 4 screws, screw the box together.
- Now you can snap-attach the light to the hollow Romboss tile
License:
Creative Commons — Attribution — Noncommercial — Share Alike
MileStorm
