inflatable rescue boat coastguard

The original model is great, i just simplified it a bit to make it more robust for my little daughter as a toy.

I printed the boat on my Sovol SV06 Plus with the following settings:

Material: PETG from Sunlu in Sakura Pink
Nozzle-Temp: 245°C
Bed-Temp: 80°C
Support: Yes (Normal, no tree)
Nozzle: 0,4mm
Layer Height: 0,2mm
Infill: 20%
Print Speed: 75mm/s
Outer Wall Speed: 50mm/s
Initial Layer Speed: 50mm/s
Fan Speed: 60%

I changed the size and printed it in 150%.
I also printed it in a 45° angle, to reduce support material and improve the bottom surface of the “inflatable” area.
To better "support" it in this position i added a small manual / custom strut or pillar.

Thanks a lot to the creator of the original model.
My daughter loves it.