Aeon Trespass Odyssey - All In (No Minis) Insert

These are print files for a HUGE insert to store ALL game content: books, board, luxury tiles and Onwards Odyssey - for people who want to store or exhibit their miniatures outside the box. 

• A description of all the trays is here. 

• See this document for detailed description and printing instructions.

• A more complete photo gallery of all trays, with game elements and without, and a video description, here.

This is a MASSIVE insert - 3.5 kg, with 48 trays, 5 drawers for tokens and 75 dividers. This is designed to be not only a tool for storage, but to get the game to the table quickly and be very useful during play. For example: 

• One tray with all Kratos tokens. 

• One tray with all Combat/Encounter tokens.

• One tray with all Voyage/Story tokens. 

• One tray for all Trauma cards, organized by Minor, Major, Grave and with space for storage and Obol total deck and current Obol deck 

• Each argonaut has an individual tray, where you can store their cards, mnemos and triskelion. These trays can also be used during play, allowing you to slot cards vertically during use.

• Each cycle has separate trays, only take out the one for your cycle.

• All secrets and decks are clearly labeled and with dividers. 

• All trays have labels for all their content. 

• Specific tray to save your campaign progress - the 'armory' - crafted gear, projects, techs, mnemos vault, etc. 

• 7 'extra' trays to store mini, standard cards and other components you want. 

Sleeving... 

• The insert will fit all decks sleeved except technologies and gear. 

•  If you want to sleeve all, the insert comes with extra unused trays to store mini and standard cards. You would need to fit as many gear and tech as possible on each cycle's trays, and then overflow into these trays. With 50 micron sleeves most or all will fit. With 100 micron sleeves, you will have to have a system to manage storing some of them in these other trays.

• If you need even more space, an option exists to:

  • Not store the books in the box

  • Use the space for 5 separate trays for each cycle's sleeved Gear and Technologies, and a LARGE tray for sleeved large car

The insert has 3 options: 

• Storage of soft cover books, with trays around it to store mini and standard cards. 

• Storage of hard cover books - which, as they are larger, makes the trays around it to store mini and standard cards smaller. 

• If you sleeve ALL cards with very thick sleeves, and are ok storing the books outside, the book space can be used for 5 extra trays, one per cycle, for sleeved Gear and Tech cards, and one large tray for Large cards also sleeved.

With this purchase, you are getting:

• The print instructions and quick reference guide linked above.

• A checklist to help you track your printing.

• 103 3mf files with multiple bodies, ready for quick color printing.

• 103 STL files, adjusted to print in single color printers.

• My continued support, with your email, I will send you any updates done to the insert. 

  • Any suggestions for improvements or new ideas, within reason, will be implemented and shared with all.

  • As well any errors community finds will be fixed and shared. I have already sold several prints so I think quality is relatively good. 

Versions

1.00

• Initial Release

1.01

• Strengthened second layer supports of Lux Tiles trays, L Trays, Armory and Various Tray – they where quite thin and could break more easily than they should.

• Fixed numbers on Cycle 5 lux tile tray.

• Improved Trauma tray for multicolor printing. Thicker front wall for better appearance.

• Added mono STL parts

• Added print checklist

1.02

• L Tray cycle 1 was missing logo and Tarot text was embedded.

• Enlarged rails for drawers in C123 Conditons tray, previous where too short and drawers could move around too much.

1.03

• Lux tiles tray for Cycle 3 was missing a color trim section

• Map trays for both cycles, had text on sides mixed between sides. Fixed, and added new version has logos and text as separate bodies, so could be printed multicolor (a 0.4 nozzle is recommended for this!).

1.04

• Map trays were wrong in last update, fixed.

• Burden tray was also wrong, fixed.

• Several trays had text very slightly angled. This has been fixed in this release. No need to reprint if you haven’t even noticed! 😊

• Added comment to print instructions 0.4 nozzle is better for parts with horizontal text.

1.05

• From hurried fix of map trays with the text wrong in last update, I never updated the cycle logos. So on one side of the tray they were wrong. This is now fixed.

1.06

• Card spaces in Extra Tray 6 were not even and one of them too small for Standard cards. Now both are 94mm and the same size both.

• Increased size of C123 Secrets by 4mm width, as space next to it was empty, allowing to fit more components.

• Extra Tray 1 was too large for mini cards, too small for others. Changed tray to have a space for mini cards instead, plus empty space next.

• Dice and Various is 4mm longer – one buyer’s sleeves would not fit in space, so as space is available, made part longer.

1.07·       Removed Mono files (not worth maintenance effort).

• Added Dividers from All In insert:

  • More clear naming convention, indicating which are cycle specific.

  • Added Large Card dividers.

• Added 2 new alternates from All In insert:

  • Added alternates to support a new Separated Conditions Tray: see new section in Alternates. Replaces C45 Conditions Cards with  a very nice tray to store all Condition cards separated and with names for quick access. New Extra Tray - 4 (with Tokens) to store tokens that were stored in previous Conditions tray.

  • Added Trauma tray alternate with wider space front row. User reported that with 100 microns, cards were quite tight, which made drawing and especially returning cards difficult. Each space increased from 8.8mm to 11mm. Shouldn’t cause a problem with fit within the insert. As this doesn’t affect fit within the box and barely increases lid lift, I recommend this alternate.