Mini Surron Fingerbike!
Want to bring your Surron with you everywhere? Well, now you can. Assembly for this model is kind of tricky but you can do it!
Tools Required:
Materials Required:
Assembly Instructions: (I may add a video later but I do not have time)
- Hot glue in a piece of barbeque skewer to attach the swing arm to the frame
- Superglue the wheel haves together with the flat-sided wheels together and the rounded sides wheels together.
- Superglue the 2 smaller glasses brackets to the top and bottom of the steerer tube
- glue a about 1.5 inch piece of smore stick(Changes depending on your springs) to each side of the steerer tube through the glasses brackets
- cut 2 about 1-inch sections of the paper straw(Changes depending on your springs) and press them into the two larger glasses brackets, secure them with a small amount of glue.
- Use 2 thin springs from the Uniball pens and glue them to the bottom of the smore stick stanchions with a small amount of hot glue, make sure that there is no glue past the diameter of the stanchions.
- Press the assembly with the straw pieces over the springs and put a pea-sized amount of glue in the small fork boots(circular items with a cylinder going across the diameter) and press them over the springs and straws binding the bottom of the fork together.
- Hot glue the spring from the Pilot G2 pen to the swingarm and to the bottom of the seat.
- Attach the wheel with flat sides to the fork with a piece of barbeque skewer through the fork boots. attach the second wheel to the swingarm through the holes at the back.
- Have Fun!
Creeaytiv
