Dragon Eclipse Custom Insert for the big box Gamefound release.

This is for the Big Box / Miniatures version of the game, if you have the Standee / Retail version please go to: https://www.printables.com/model/1285878-dragon-eclipse-custom-insert-for-the-standee-gamef

TLDR: Print 1 of each file except:

3x DE_LargeCards

2x DE_Token_Tray_Bottom

This is a HEAVY print, I recommend using no higher than 5% infill

Please note the deck box shown in the picture was an earlier version, the trays have been rotated on the model you download.

---

I don't charge for my designs, however if you would like to buy me a coffee you can do so here: https://ko-fi.com/denzarki

---

Update: 
1/ i have heard that if you sleeve everything it would need 4 of my large card boxes meaning that this insert does not work with a fully sleeved deck if you wanted to fit all content but i would suggest maybe only sleeving cards as they enter your party and decks if you'd like to use sleeves, not ideal though.

2/ thanks to Wolfan on thingiverse for the final screenshot (with black filament) that shows that if you don't print DE_Extra you can fit in the campaign add-on deck box

3/ thanks to @MauriceJanss_3176710 for his idea for the standee boxes and for test printing and taking pictures for me. (you can find this on the standee version by clicking the link at the top)

The Long Bit:

Here we have my very first full insert project (so go easy on me ;) )

Inspired by Hextra's work on Tamashii (you will notice a similarity in my card box design) I wanted to make a full insert for Dragon Eclipse that also allowed the storing of all the additional content that I had bought.

If followed exactly you will be able to fit all of the base content, all of foray into the shadow realm, all extra mystlings and all 5 neoprene arena mats into one box. This does not hold anything from the untamed expansion or its mat. The card trays have been made wide enough to accept sleeves however please see update 2 above regarding what will fit.

Some people may not like taking their minis out of their protective boxes, you can print JUST the bottom layer and you will still be able to put everything EXCEPT the mystling encylopedia, extra minis, shadow realm minis and neoprene mats into the box.

If you do want to use my mini storage solution you will need one of each of the files except you will need:

3x DE_LargeCards

2x DE_Token_Tray_Bottom

This is a HEAVY print, I recommend using no higher than 5% infill

(Do not print the Mini storage files of course if you do not want my mini storage solution but there will be a small gap on the bottom layer where the binder should be)

For the mini storage, I original planned it out so that an original mini storage lid would fit on top of my 4 boxes however I failed to take into account the rounded corners and so it would not fit, rather than redesigning the whole thing there are 2 options you can see in the assembly pictures. Either A/ Take the mini storage lid from the larger minis (the one without the letters on it showing you where to put luminesca) and cut the corners off as shown in the picture, it will then sit on top of the insert. or B/ if you don't want to damage original inserts, the arena map book is big enough to act as a lid as shown in the picture after the miniature lid picture.

When adding the books into the box make sure the big spiral binding of the adventure book sits to the left of the neoprene mats, there is enough space for that if you fold the mats in half.

I welcome remixing just link to me so i can see it :D especially if you think of a better way of doing the minis.

The uploaded pictures should cover how everything fits but feel free to ask any questions.