[CyberBase System] Top Logo Holder for Modular Detail Wall

Here's an add-on to the CyberBase Modular Wall system which can help reuse from nice box logos or other graphics from your bots' boxes!

As this is an addon to the existing CyberBase Modular Tiles system, you will need to get the other components from our earlier two sets here:

• https://www.patreon.com/posts/72853844
• https://www.patreon.com/posts/74255079

Basically, the way this works is by using magnets to attach any logo you might like to the wall of your display setup! And even though we'e used a magnetic setup here, you can just as easily replace that with some tape if you don't have magnets handy.

And then from there, organize and pose your bots in your display as you like!

=== Assembly ===

Here's a quick step-by-step on the process. First just find any logo on boxes you might like to use in your display. We find that leader class boxes tend to have the right width. roughly similar to the CyberBase walls. Then just cut out around the logo as you prefer.

To ensure things are roughly centered, you might want to measure out the center point approximately with a ruler. Next, using the template for the magnets, mark out the position where you would like them to go.

Do note that you might want the magnets positioned slightly vertically lower so that the logo would stick out upwards, and not clash with anything beneath it.

From there, glue on your 5mm (radius) x 3mm (depth) magnets! Similar magnets also need to be embedded into the wall part. Do watch out for the polarity of the magnets so that you don't accidentally put them in a repelling configuration!

===

Have fun using this little addon to both reuse some cardboard which would have been tossed, and also bring new display options for your collections.

Happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)
 

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog