Lepus Full auto Talon Nerf Blaster mk2

Originally released in 2019 moving to printables

Lepus Mk2

XT-TK (eXposed Trigger - Talon + Katana) Variant

The Lepus is a fully custom designed Nerf blaster that is about as small as you can make it. It uses worker Talon mags and worker hurricane wheels and the compact n20 gear motor for the auto pusher.

Why?

I wanted a really compact full auto sidearm to be a companion for my caliburn or HPA blaster, using talons meant it was compatible with the mags I already use in my other blasters. Making the mag feed through the handle kept the size small and gave it an Uzi/Mac10 feel.

To add picatinny rail on the top use one of these rails
https://www.printables.com/model/931016-picatinny-rails

if you need a holster for it then use the poplok
https://www.thingiverse.com/thing:3800736

Mk 2 Changes

Increased the size of the tabs on the back cover
Built in mag stop to the FWC
Change the motor mounting system from pressure fit to screws
Made different crush levels 34.0, 33.5, 33.0mm 32.5mm
Added katana compatible grip
Improve pusher cam shape
Move pusher home position switch

ToDo’s / Ideas

Improve triggers (add covers?) 
Add mag release
Make FTW variant This would have to be a new blaster
Improve overhang by flywheel covers on lid

Hardware you need
2x 130 motors
2x hurricane wheels
N20 gear motor 1000 or 1200rpm
Small lipo (56x31x11mm)
18awg wire
20 or 22awg wire
Heatshrink
Mosfet module (including mosfet, diode and resistors)
XT30
2x Subminiature micro switch
Miniature microswitch
7x M2.6x8mm screw
2x M2.6x10mm screw
4x M2x10mm screw
M3 brass insert
M3 thumbscrew
2 x M2 motor screws

Print Settings

• Resolution: 0.2
• Infill: 25%