Worry Stone Fidgets (Easy to Print)

Please hit the “Like” button if you like these models. They are super easy to print were designed with a good bit of surface area so when printed flat, no brim was needed.

Worry stones have always been my go-to when it comes to fidgets. I'm teaching myself Fusion360 and figured I'd give designing my own worry stones a go. The edges are smooth, and the rounded triangle shape fits nicely in the hand. 

I've included 3 models. One is a triangle shape with a concaved surface for the classic, worry stone feel. The other two models have a 20mm hole in the middle that adds a cool dimension to the fidget. The only difference between the two with holes is one is 10mm thick and the other is 15mm thick. 

Printing:

• Supports: None
• Infill: I used 15% but you can use a higher value if you want more weight.
• Layer Height: I use .16 but .2 should work just fine.
• Material: PLA (I prefer to use a matte PLA as it makes for a softer surface feel).