Please hit the “Like” button if you like these models. They are super easy to print were designed with a good bit of surface area so when printed flat, no brim was needed.
Designed in Fusion 360, this is my second set of Worry Stones. I have included three different models which offer slightly different aesthetics. Each model shares the 20mm hole in the middle and slightly rounded edges to present a smooth feel.
- HexBone1.stl: This is a hexagon shaped Worry Stone with slightly concave edges between the vertices. This model is roughly 41mm wide.
- HexBone2.stl: I figured some might prefer a slightly smaller Worry Stone, so I copied the HexBone1 model and made the actual hexagon roughly 34mm across. Other than that, it's the exact same as the larger model.
- WorryBoneNotches.stl: This model also has six sides, but three sides are shorter with deeper concave faces. The other three sides are longer and have more shallow concave faces. This is probably my favorite :).
Printing:
- Supports: None
- Infill: I used 15% but you can use a higher value if you want more weight.
- Layer Height: I use .16 but .2 should work just fine.
- Material: PLA (I prefer to use a matte PLA as it makes for a softer surface feel).
Here's a link to the first Worry Stones I designed: Worry Stone Fidgets (Easy to Print) by HyggeJack | Download free STL model | Printables.com
HyggeJack
