Vagrantsong + Encore Big Box to Small Box Conversion Insert

This insert should work in either the base box or the Encore box (I think they're the same size) so you can choose your favourite art.

---

I don't charge for my designs, however if you would like to buy me a coffee you can do so here: https://ko-fi.com/denzarki

---

I made it my mission to ditch the Big Box because it's stupidly large, this is what I came up with. Everything fits into the base box with only 12mm lid lift (and that's with playerboards (found here https://www.printables.com/model/1147295-vagrantsong-character-board-remix ) and dice tray inside, so your lid lift may be less if you don't have those). 

You will need to print 1 of each file and then 6x VS_CharacterBox and 2xCharacterBoxLid (the lids are only intended for the top 2 boxes, the boxes should stack inside eachother)

PLEASE NOTE: THIS NEEDS TO BE STORED HORIZONTALLY.  I originally assumed due to the tight fit of components and my lids that vertical storage would be possible. However, because the books cause the lid to move around because they're not all equal size, equal pressure is not distributed around the insert and my lids come loose. Therefore i only advise horizontal storage. 

THINGS THAT NEED TO BE REMOVED: If you are using the foil versions of the expansion cards, remove the none foil versions and store them with your other boxes and vice versa. If you are using Acrylic tokens, remove the cardboard tokens and store with your other boxes. There is space in the box for 3 sets of 8 dice and 1 set of 6 dice, that is how many i have, if there were other exclusive dice you will need to store any extra with your other boxes. There IS space for the spare bindle if you have the special one that came with the Acrylic Tokens. There IS space for the WAY TOO MANY standee bases as I needed to block up some wasted space at the end.

MORE INFO:

Please store the bag tokens (ie. apple, salt etc) inside the bag and then store the bag on top of the dice box which is intentionally shorter than everything else.

Please note the only extra I have is Amigo and the Bandit but there are some spaces in the expansions small card box and large card box for extra cards and the standee box should be able to hold another standee or 2.

This was made for the acrylic tokens, the cardboard tokens will likely still fit in the tokens box but not perfectly.

There are different sized slots for the card decks, you can see the picture for which cards go where but essentially i have split the boxes into original game and expansion content. The original game large card box has a small section for in between cards removed when adding in the expansion. 

All cards associated with characters are intended to be stored in the character boxes. There are 2 sides to the character boxes, my vision for this was that you could store cards not in use on one side and cards currently in use on the other. 

There is space for character tokens to be stored in the character boxes or the token storage box. Please note that because of the tight spacing in the tokens box if you have all of the character tokens in it, they're hard to get out without tipping the box. 

There is also space in the large tokens slot for the metal coin (this is the slot on the opposite side of the box as the hearts tub.. as seen in pictures), the same problem of it being hard to pick up the first token is also present in the large tokens as all needed space was used